block 1 of mass m1 is placed on block 2 of mass m2 which is then placed on a table. a string connecting…

block 1 of mass m1 is placed on block 2 of mass m2 which is then placed on a table. a string connecting block 2 to a hanging mass m passes over a pulley attached to one end of the table, as shown above. the mass and friction of the pulley are negligible. the coefficients of friction between blocks 1 and 2 and between block 2 and the tabletop are nonzero and are given in the following table.\n| |coefficient between blocks 1 and 2|coefficient between block 2 and the tabletop|\n|--|--|--|\n|static|μs1|μs2|\n|kinetic|μk1|μk2|\nexpress your answers in terms of the masses, coefficients of friction, and g, the acceleration due to gravity.\na. suppose that the value of m is small enough that the blocks remain at rest when released. for each of the following forces, determine the magnitude of the force and draw a vector on the block provided to indicate the direction of the force if it is nonzero.\ni. the normal force n1 exerted on block 1 by block 2\nii. the friction force f1 exerted on block 1 by block 2\niii. the force t exerted on block 2 by the string m2\niv. the normal force n2 exerted on block 2 by the tabletop m2\nv. the friction force f2 exerted on block 2 by the tabletop\nb. determine the largest value of m for which the blocks can remain at rest.\nc. now suppose that m is large enough that the hanging block descends when the blocks are released. assume that blocks 1 and 2 are moving as a unit (no slippage). determine the magnitude of their acceleration.\nd. now suppose that m is large enough that as the hanging block descends, block 1 is slipping on block 2. determine each of the following.\ni. the magnitude a1 of the acceleration of block 1\nii. the magnitude a2 of the acceleration of block 2

block 1 of mass m1 is placed on block 2 of mass m2 which is then placed on a table. a string connecting block 2 to a hanging mass m passes over a pulley attached to one end of the table, as shown above. the mass and friction of the pulley are negligible. the coefficients of friction between blocks 1 and 2 and between block 2 and the tabletop are nonzero and are given in the following table.\n| |coefficient between blocks 1 and 2|coefficient between block 2 and the tabletop|\n|--|--|--|\n|static|μs1|μs2|\n|kinetic|μk1|μk2|\nexpress your answers in terms of the masses, coefficients of friction, and g, the acceleration due to gravity.\na. suppose that the value of m is small enough that the blocks remain at rest when released. for each of the following forces, determine the magnitude of the force and draw a vector on the block provided to indicate the direction of the force if it is nonzero.\ni. the normal force n1 exerted on block 1 by block 2\nii. the friction force f1 exerted on block 1 by block 2\niii. the force t exerted on block 2 by the string m2\niv. the normal force n2 exerted on block 2 by the tabletop m2\nv. the friction force f2 exerted on block 2 by the tabletop\nb. determine the largest value of m for which the blocks can remain at rest.\nc. now suppose that m is large enough that the hanging block descends when the blocks are released. assume that blocks 1 and 2 are moving as a unit (no slippage). determine the magnitude of their acceleration.\nd. now suppose that m is large enough that as the hanging block descends, block 1 is slipping on block 2. determine each of the following.\ni. the magnitude a1 of the acceleration of block 1\nii. the magnitude a2 of the acceleration of block 2

Answer

Explanation:

Step1: Analyze normal force on block 1

In vertical - equilibrium for block 1, the normal force $N_1$ exerted on block 1 by block 2 balances the weight of block 1. So $N_1 = m_1g$.

Step2: Analyze friction force on block 1

Since the blocks are at rest and there is no relative - motion tendency between blocks 1 and 2 in the horizontal direction, $f_1 = 0$.

Step3: Analyze tension force on block 2

The tension force $T$ in the string is equal to the weight of the hanging mass $M$ when the system is at rest. So $T = Mg$.

Step4: Analyze normal force on block 2

In vertical - equilibrium for block 2, the normal force $N_2$ exerted on block 2 by the tabletop balances the combined weight of block 1 and block 2. So $N_2=(m_1 + m_2)g$.

Step5: Analyze friction force on block 2

The friction force $f_2$ on block 2 balances the tension force $T$ when the system is at rest. So $f_2 = Mg$.

Step6: Find the maximum value of $M$ for static equilibrium

The maximum static - friction force between block 2 and the tabletop is $f_{s2,\max}=\mu_{s2}N_2=\mu_{s2}(m_1 + m_2)g$. At the verge of moving, $Mg=\mu_{s2}(m_1 + m_2)g$, so $M=\mu_{s2}(m_1 + m_2)$.

Step7: Analyze acceleration when blocks move as a unit

For the combined mass of blocks 1 and 2 ($m_1 + m_2$) and the hanging mass $M$, using Newton's second law $F = ma$. The net - force equation is $Mg-\mu_{k2}(m_1 + m_2)g=(M + m_1 + m_2)a$. Solving for $a$ gives $a=\frac{Mg-\mu_{k2}(m_1 + m_2)g}{M + m_1 + m_2}$.

Step8: Analyze acceleration of block 1 when it slips

The friction force on block 1 is $f_{k1}=\mu_{k1}m_1g$. Using Newton's second law for block 1, $f_{k1}=m_1a_1$, so $a_1=\mu_{k1}g$.

Step9: Analyze acceleration of block 2 when block 1 slips

For block 2, the net - force equation is $T - f_{k1}-f_{k2}=m_2a_2$, where $T = Mg$, $f_{k1}=\mu_{k1}m_1g$ and $f_{k2}=\mu_{k2}(m_1 + m_2)g$. Also, from the pulley system, the equations of motion for the whole system can be used. The net - force on the system of block 2 and the hanging mass (considering the forces acting on block 2) is $Mg-\mu_{k1}m_1g-\mu_{k2}(m_1 + m_2)g=(M + m_2)a_2$. Solving for $a_2$ gives $a_2=\frac{Mg-\mu_{k1}m_1g-\mu_{k2}(m_1 + m_2)g}{M + m_2}$.

Answer:

a. i. $N_1 = m_1g$, direction: vertically upward ii. $f_1 = 0$ iii. $T = Mg$, direction: horizontally (depending on the orientation of the string) iv. $N_2=(m_1 + m_2)g$, direction: vertically upward v. $f_2 = Mg$, direction: horizontally opposite to the direction of $T$ b. $M=\mu_{s2}(m_1 + m_2)$ c. $a=\frac{Mg-\mu_{k2}(m_1 + m_2)g}{M + m_1 + m_2}$ d. i. $a_1=\mu_{k1}g$ ii. $a_2=\frac{Mg-\mu_{k1}m_1g-\mu_{k2}(m_1 + m_2)g}{M + m_2}$